PostComm_L
(
type: esriFieldTypeString, alias: Postal Community Name Left, length: 40
)
PostComm_R
(
type: esriFieldTypeString, alias: Postal Community Name Right, length: 40
)
RoadClass
(
type: esriFieldTypeString, alias: Road Class, length: 15
, Coded Values:
[Alley: A service road that does not generally have associated addressed structures and is usually unnamed. It is located at the rear of buildings and properties and is used for deliveries.]
, [Bridle Path: A path that is used for horses, being either too narrow for or legally restricted from vehicular traffic.]
, [Local: Generally a paved non-arterial street, road, or byway that usually has a single lane of traffic in each direction.]
, ...11 more...
)
OneWay
(
type: esriFieldTypeString, alias: ONEWAY, length: 2
, Coded Values:
[TF: One-way traveling from TO node to FROM node]
, [B: Travel in both directions allowed]
, [FT: One-way traveling from FROM node to TO node]
)
PostComm_L
(
type: esriFieldTypeString, alias: Postal Community Name Left, length: 40
)
PostComm_R
(
type: esriFieldTypeString, alias: Postal Community Name Right, length: 40
)
RoadClass
(
type: esriFieldTypeString, alias: Road Class, length: 15
, Coded Values:
[Alley: A service road that does not generally have associated addressed structures and is usually unnamed. It is located at the rear of buildings and properties and is used for deliveries.]
, [Bridle Path: A path that is used for horses, being either too narrow for or legally restricted from vehicular traffic.]
, [Local: Generally a paved non-arterial street, road, or byway that usually has a single lane of traffic in each direction.]
, ...11 more...
)
OneWay
(
type: esriFieldTypeString, alias: ONEWAY, length: 2
, Coded Values:
[TF: One-way traveling from TO node to FROM node]
, [B: Travel in both directions allowed]
, [FT: One-way traveling from FROM node to TO node]
)
Description: This feature class was created to be used as a reference for Williams County. The data was created and digitized by the Williams County GIS Department.
Description: This feature class was created to be used as a reference for Williams County to show Sections within each PLSS Township. The data was created and digitized by the Williams County GIS Department.
Description: This feature class was created to be used as a reference for Williams County. The data shown includes PLSS Quarter-Sections and Quarter-Quarters for the Sections within the Williams County Townships. The data was created and digitized by the Williams County GIS Department.
St_PreMod
(
type: esriFieldTypeString, alias: Street name Pre Modifier, length: 15
)
St_PreDir
(
type: esriFieldTypeString, alias: Street Name Pre Directional, length: 9
, Coded Values:
[E: East]
, [N: North]
, [NE: Northeast]
, ...5 more...
)
St_PreTyp
(
type: esriFieldTypeString, alias: Street Name Pre Type, length: 50
, Coded Values:
[AVENUE: Avenues (as a Prefix)]
, [BIA ROAD: Bureau of Indian Affairs Roads]
, [BIA ROUTE: Bureau of Indian Affairs Routes]
, ...4 more...
)
St_PreSep
(
type: esriFieldTypeString, alias: Street Name Pre Type Separator, length: 20
, Coded Values:
[at: at]
, [de las: de las]
, [del: del]
, ...7 more...
)
St_Name
(
type: esriFieldTypeString, alias: Street Name, length: 60
)
St_PosTyp
(
type: esriFieldTypeString, alias: Street Name Post Type, length: 50
, Coded Values:
[ALY: ALLEY]
, [ANX: ANEX]
, [ARC: ARCADE]
, ...199 more...
)
St_PosDir
(
type: esriFieldTypeString, alias: Street Name Post Directional, length: 9
, Coded Values:
[E: East]
, [N: North]
, [NE: Northeast]
, ...5 more...
)
St_PosMod
(
type: esriFieldTypeString, alias: Street Name Post Modifier, length: 25
)
LSt_PreDir
(
type: esriFieldTypeString, alias: Legacy Street Name Pre Directional, length: 2
, Coded Values:
[E: East]
, [N: North]
, [NE: Northeast]
, ...5 more...
)
Place_Type
(
type: esriFieldTypeString, alias: Place Type, length: 50
)
Placement
(
type: esriFieldTypeString, alias: Placement Method, length: 25
, Coded Values:
[Geocoding: Placement of an address point to represent an address along a road segment based on the high and low numbers assigned to the road segment using geocoding techniques.]
, [Parcel: Placement of an address point to represent an address associated with a parcel.]
, [Property Access: Placement of an address point to represent an address based on the location of the primary access to a given property.]
, ...3 more...
)
Long
(
type: esriFieldTypeDouble, alias: Longitude
)
Lat
(
type: esriFieldTypeDouble, alias: Latitude
)
Description: Polygons reflect the legal boundaries of communities and cities in Williams County. Features were digitized by hand using legal descriptions and survey plats to accurately place the boundaries. Updated 1/26/2018
Description: This dataset was created and edited to reflect subdivision block polygon boundaries found within subdivision plats in Williams County, North Dakota. The data was digitized directly from finalized and recorded subdivsion plats to the blocks feature class.Update: Continuously
Description: This dataset was created and edited to reflect lot land tract polygon boundaries found within subdivision plats in Williams County, North Dakota. The data was digitized directly from finalized and recorded subdivsion plats to the lots feature class.Update: Continuously
Description: Identifies the type, owner, and approval date of Conditional Use Permits in Williams County. Data was drawn based on legal descriptions obtained from the Williams County Planning & Zoning Department. This feature class is updated continuously as new Conditional Use Permits are approved by the Planning & Zoning Department.Update: Continuously
Description: Identifies the type, date of inception, and a description of Zoned properties throughout Williams County. Data was drawn based on legal descriptions obtained from the Williams County Planning & Zoning Department. This feature class is updated continuously as new Conditional Use Permits are approved by the Planning & Zoning DepartmentUpdate: Continuously
Description: Identifies the type, date of inception, and a description of Zoned properties throughout Williams County. Data was drawn based on legal descriptions obtained from the Williams County Planning & Zoning Department. This feature class is updated continuously as new Conditional Use Permits are approved by the Planning & Zoning DepartmentUpdate: Continuously
Description: This data set represents the extent, approximate location and type of wetlands and deepwater habitats in the conterminous United States. These data delineate the areal extent of wetlands and surface waters as defined by Cowardin et al. (1979). Certain wetland habitats are excluded from the National mapping program because of the limitations of aerial imagery as the primary data source used to detect wetlands. These habitats include seagrasses or submerged aquatic vegetation that are found in the intertidal and subtidal zones of estuaries and near shore coastal waters. Some deepwater reef communities (coral or tuberficid worm reefs) have also been excluded from the inventory. These habitats, because of their depth, go undetected by aerial imagery. By policy, the Service also excludes certain types of "farmed wetlands" as may be defined by the Food Security Act or that do not coincide with the Cowardin et al. definition. Contact the Service's Regional Wetland Coordinator for additional information on what types of farmed wetlands are included on wetland maps.
Copyright Text: US Fish and Wildlife Service
www.nd.gov/gis
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.Contains Lat/Long data and footage descriptions (legal description), as well as operator information, type/status, NDIC File number and other oil and gas related information. Status: A = Active, AB = Abandoned, DRL = Drilling, Dry = Dry, EXP = Expired, IA = Inactive, LOC = Location, PA = Producer Abandoned, PNC = Permit Now Cancelled, PNS = Permit Now Suspended TA = Temporarily Abandoned, TAO = Temporarily Abandoned Observation Well Type: AGD = Acid Gas Disposal, AI = Air Injection, DF = Dump Flood, DFP = Dump Flood Producing, GASN = Nitrogen Gas Well, GASC = Gas Condensate, GASD = Gas Dry, GI = Gas Injection, GS = Gas Storage, OG = Oil or Gas Well, SWD = Salt Water Disposal, WI = Water Injection, WS = Water Supply, ST = Strat Test, CBM = Coal Bed Methane
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.This layer contains Lat/Long data along with other oil and gas related information. Symbols represent the surface location of a rig. There may be a delay in actual locations of any specified rig depending on when updated locational data is submitted to the NDIC. Rig Status: DRLG - Drilling, TDED - Target Depth Reached, MIRU - Moving In/ Rigging Up
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota Water Commission, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: ND State Water Commission www.swc.state.nd.us
Description: All data was obtained from the State of North Dakota Water Commission, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: ND State Water Commission www.swc.state.nd.us
Description: North Dakota statewide ambulance service area polygons. The data was created in 2011 to replace an earlier dataset that was obsolete and contained topology errors. The dataset was compiled from the following data sources: North Dakota state maintained county boundaries, ambulance service area shapefiles provided by some counties, PDF files provided by some counties that showed ambulance service boundaries, and a shapefile from Bullberry Services.
Copyright Text: North Dakota Department of Health
www.nd.gov/gis