Description: This feature class was created to be used as a reference for Williams County. The data was created and digitized by the Williams County GIS Department.
Description: This feature class was created to be used as a reference for Williams County to show Sections within each PLSS Township. The data was created and digitized by the Williams County GIS Department.
Description: This feature class was created to be used as a reference for Williams County. The data shown includes PLSS Quarter-Sections and Quarter-Quarters for the Sections within the Williams County Townships. The data was created and digitized by the Williams County GIS Department.
Description: This feature class includes both bridges maintained by the State of North Dakota or the United States Government, as well as bridges maintained by Williams County. County bridge locations were digitized by hand using a paper map resource showing bridge locations, obtained from the Williams County Highway Department. Attribute information for some of these bridges was created using a shapefile obtained from the North Dakota Department of Transportation. Federal bridge locations were imported from the National Bridge Inventory 2010, created by the Federal Highway Administration, USDOT, and distributed by ESRI. Bridges located within or along the boundaries of Williams County were exported, re-projected to the North Dakota State Plane System, and merged with the County Bridge data.
Copyright Text: Williams County GIS Department
USDOT Federal Highway Administration
North Dakota Department of Transportation
Description: This feature class gives a represeentation of public Right of Way boundaries. The data is digitized directly from finalized and recorded subdivision plats.Update: Continuously
PostComm_L
(
type: esriFieldTypeString, alias: Postal Community Name Left, editable: true, nullable: true, length: 40, defaultValue: null, modelName: PostComm_L
)
PostComm_R
(
type: esriFieldTypeString, alias: Postal Community Name Right, editable: true, nullable: true, length: 40, defaultValue: null, modelName: PostComm_R
)
RoadClass
(
type: esriFieldTypeString, alias: Road Class, editable: true, nullable: true, length: 15, defaultValue: null, modelName: RoadClass
, Coded Values:
[Alley: A service road that does not generally have associated addressed structures and is usually unnamed. It is located at the rear of buildings and properties and is used for deliveries.]
, [Bridle Path: A path that is used for horses, being either too narrow for or legally restricted from vehicular traffic.]
, [Local: Generally a paved non-arterial street, road, or byway that usually has a single lane of traffic in each direction.]
, ...11 more...
)
OneWay
(
type: esriFieldTypeString, alias: ONEWAY, editable: true, nullable: true, length: 2, defaultValue: B, modelName: OneWay
, Coded Values:
[TF: One-way traveling from TO node to FROM node]
, [B: Travel in both directions allowed]
, [FT: One-way traveling from FROM node to TO node]
)
PostComm_L
(
type: esriFieldTypeString, alias: Postal Community Name Left, editable: true, nullable: true, length: 40, defaultValue: null, modelName: PostComm_L
)
PostComm_R
(
type: esriFieldTypeString, alias: Postal Community Name Right, editable: true, nullable: true, length: 40, defaultValue: null, modelName: PostComm_R
)
RoadClass
(
type: esriFieldTypeString, alias: Road Class, editable: true, nullable: true, length: 15, defaultValue: null, modelName: RoadClass
, Coded Values:
[Alley: A service road that does not generally have associated addressed structures and is usually unnamed. It is located at the rear of buildings and properties and is used for deliveries.]
, [Bridle Path: A path that is used for horses, being either too narrow for or legally restricted from vehicular traffic.]
, [Local: Generally a paved non-arterial street, road, or byway that usually has a single lane of traffic in each direction.]
, ...11 more...
)
OneWay
(
type: esriFieldTypeString, alias: ONEWAY, editable: true, nullable: true, length: 2, defaultValue: B, modelName: OneWay
, Coded Values:
[TF: One-way traveling from TO node to FROM node]
, [B: Travel in both directions allowed]
, [FT: One-way traveling from FROM node to TO node]
)
Description: Polygons reflect the legal boundaries of communities and cities in Williams County. Features were digitized by hand using legal descriptions and survey plats to accurately place the boundaries.
Description: This dataset was created and edited to reflect precise subdivision polygon boundaries found within subdivision plats in Williams County, North Dakota. The information includes approximate geographic locations and attributes defining the development level of the site. The data was digitized directly from finalized and recorded subdivsion plats.Update: Continuously
Description: This dataset was created and edited to reflect subdivision block polygon boundaries found within subdivision plats in Williams County, North Dakota. The data was digitized directly from finalized and recorded subdivsion plats to the blocks feature class.Update: Continuously
Description: Identifies properties throughout Williams County. Data was drawn based on legal descriptions and plats obtained from the Williams County Recorder's and Assesor's offices. This feature class is updated continuously as parcels splits are recorded. Parcels_forOnline is a combination of the BSI tax data and Williams County Parcels Feature Class.Update: Continuously
Copyright Text: Williams County GIS and BSI tax database
Description: This dataset was created and edited to reflect lot land tract polygon boundaries found within subdivision plats in Williams County, North Dakota. The data was digitized directly from finalized and recorded subdivsion plats to the lots feature class.Update: Continuously
St_PreTyp
(
type: esriFieldTypeString, alias: Street Name Pre Type, editable: true, nullable: true, length: 50, defaultValue: null, modelName: St_PreTyp
, Coded Values:
[AVENUE: Avenues (as a Prefix)]
, [BIA ROAD: Bureau of Indian Affairs Roads]
, [BIA ROUTE: Bureau of Indian Affairs Routes]
, ...4 more...
)
St_PreSep
(
type: esriFieldTypeString, alias: Street Name Pre Type Separator, editable: true, nullable: true, length: 20, defaultValue: null, modelName: St_PreSep
, Coded Values:
[at: at]
, [de las: de las]
, [del: del]
, ...7 more...
)
Placement
(
type: esriFieldTypeString, alias: Placement Method, editable: true, nullable: true, length: 25, defaultValue: Unknown, modelName: Placement
, Coded Values:
[Geocoding: Placement of an address point to represent an address along a road segment based on the high and low numbers assigned to the road segment using geocoding techniques.]
, [Parcel: Placement of an address point to represent an address associated with a parcel.]
, [Property Access: Placement of an address point to represent an address based on the location of the primary access to a given property.]
, ...3 more...
)
Long
(
type: esriFieldTypeDouble, alias: Longitude, editable: true, nullable: true, defaultValue: null, modelName: Long
)
Lat
(
type: esriFieldTypeDouble, alias: Latitude, editable: true, nullable: true, defaultValue: null, modelName: Lat
)
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.This layer contains Lat/Long data along with other oil and gas related information. Symbols represent the surface location of a rig. There may be a delay in actual locations of any specified rig depending on when updated locational data is submitted to the NDIC. Rig Status: DRLG - Drilling, TDED - Target Depth Reached, MIRU - Moving In/ Rigging Up
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.Contains Lat/Long data and footage descriptions (legal description), as well as operator information, type/status, NDIC File number and other oil and gas related information. Status: A = Active, AB = Abandoned, DRL = Drilling, Dry = Dry, EXP = Expired, IA = Inactive, LOC = Location, PA = Producer Abandoned, PNC = Permit Now Cancelled, PNS = Permit Now Suspended TA = Temporarily Abandoned, TAO = Temporarily Abandoned Observation Well Type: AGD = Acid Gas Disposal, AI = Air Injection, DF = Dump Flood, DFP = Dump Flood Producing, GASN = Nitrogen Gas Well, GASC = Gas Condensate, GASD = Gas Dry, GI = Gas Injection, GS = Gas Storage, OG = Oil or Gas Well, SWD = Salt Water Disposal, WI = Water Injection, WS = Water Supply, ST = Strat Test, CBM = Coal Bed Methane
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota, Oil & Gas Division, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: NDIC Oil and Gas Division www.dmr.nd.gov
Description: All data was obtained from the State of North Dakota Water Commission, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: ND State Water Commission www.swc.state.nd.us
Description: All data was obtained from the State of North Dakota Water Commission, from their GIS Map Server. Data was clipped to the Williams County boundary and projected to North Dakota State Plane North.
Copyright Text: ND State Water Commission www.swc.state.nd.us
Description: U.S. National Atlas Water Feature Lines represents the linear water features (for example, aqueducts, canals, intracoastal waterways, and streams) of the United States.
Description: U.S. and Canada Water Polygons represents the lakes, reservoirs, large rivers, oceans, bays, lagoons, and estuaries in and near the United States and Canada.
This data set provides six feature classes for displaying the data at different scales. Everything about the feature classes is the same but the level of generalization and its name. The base feature class is called and isn't generalized. The least generalized feature class is called _1, the next more generalized feature class is called _2, and so on. For best performance, use the most appropriate feature class when displaying or printing.
Description: The North Dakota county coverage was originally created by the North Dakota Geological Survey using US Census Bureau TIGER data in 1994. The source scale on these data was 1:100,000. Since its creation, with USGS Public Land Survey DLG data, and USGS DRG derived data. The North Dakota State Water Commission revamped this coverage by using the NDGS PLSS coverage (combination of ND PSC, USGS DLG and DRG 24k data) to obtain county boundaries that coincided with PLSS linework, and heads-up digitized irregular boundaries such as that on the State borders, and those that followed river/stream boundaries with USGS 1:24,000 scale Digital Raster Graphics. The resultant coverage should be much better than a 1:100,000 scale coverage, but may not meet 1:24,000 scale accuracy standards
Copyright Text: ND State Water Commission
www.nd.gov/gis